Utilities8 min readUpdated 2026-11-02

How Many Centimeters in an Inch? Charts, Heights and Shortcuts

Tools mentioned in this guide

There are 2.54 centimeters in 1 inch. That number is exact: since 1959 the inch has been defined as precisely 25.4 millimeters, so there is nothing to round. 2 inches is 5.08 cm, 6 inches is 15.24 cm, and 12 inches (one foot) is 30.48 cm.

Going the other way, 1 centimeter is 0.3937 inches, or a little under 4/10 of an inch. To convert inches to centimeters, multiply by 2.54. To convert centimeters to inches, divide by 2.54.

If you just need a number, the Inches to CM converter and the CM to Inches converter update as you type. Below are charts both ways (including the fractions on a tape measure), a table for heights in feet and inches, a way to do it in your head, and the reason the inch ended up at exactly 2.54 cm.

Inches to centimeters: the chart

Fractions are the ones marked on a US tape measure. Every value is exact, because 1 inch is exactly 2.54 cm and 25.4 mm.

InchesCentimetersMillimeters
1/16 in0.1588 cm1.587 mm
1/8 in0.3175 cm3.175 mm
1/4 in0.635 cm6.35 mm
3/8 in0.9525 cm9.525 mm
1/2 in1.27 cm12.7 mm
5/8 in1.5875 cm15.875 mm
3/4 in1.905 cm19.05 mm
1 in2.54 cm25.4 mm
2 in5.08 cm50.8 mm
3 in7.62 cm76.2 mm
4 in10.16 cm101.6 mm
5 in12.7 cm127 mm
6 in15.24 cm152.4 mm
8 in20.32 cm203.2 mm
10 in25.4 cm254 mm
12 in (1 ft)30.48 cm304.8 mm
18 in45.72 cm457.2 mm
24 in (2 ft)60.96 cm609.6 mm
32 in81.28 cm812.8 mm
36 in (1 yd)91.44 cm914.4 mm
48 in (4 ft)121.92 cm1,219.2 mm

For any amount not on the chart, multiply the inches by 2.54, or type it into the Inches to CM converter. For millimeters, multiply by 25.4 or use Inches to MM.

Centimeters to inches: the chart

Metric measurements rarely land on a tidy inch, so this chart shows the decimal answer and the nearest 1/16 inch, which is the finest mark on most tape measures.

CentimetersInchesNearest tape-measure mark
1 cm0.394 inabout 3/8 in
2 cm0.787 inabout 13/16 in
2.5 cm0.984 inabout 1 in
3 cm1.18 inabout 1 3/16 in
5 cm1.97 inabout 1 15/16 in
10 cm3.94 inabout 3 15/16 in
15 cm5.91 inabout 5 7/8 in
20 cm7.87 inabout 7 7/8 in
25 cm9.84 inabout 9 13/16 in
30 cm11.81 inabout 11 13/16 in
40 cm15.75 inabout 15 3/4 in
50 cm19.69 inabout 19 11/16 in
60 cm23.62 inabout 23 5/8 in
75 cm29.53 inabout 29 1/2 in
100 cm39.37 inabout 39 3/8 in
150 cm59.06 inabout 59 1/16 in

For other lengths, divide the centimeters by 2.54, or use the CM to Inches converter. Working in millimeters? Divide by 25.4, or try MM to Inches.

How to convert inches and centimeters

  1. Inches to centimeters: multiply the inches by 2.54. Example: 8 in × 2.54 = 20.32 cm.
  2. Centimeters to inches: divide the centimeters by 2.54. Example: 45 cm ÷ 2.54 = 17.72 in. Multiplying by 0.3937 gives the same answer to four decimal places.
  3. Fractions of an inch: turn the fraction into a decimal first (3/8 = 0.375), then multiply: 0.375 × 2.54 = 0.9525 cm, or 9.525 mm.
  4. Decimal inches back to a fraction: multiply the decimal part by 16 and round. Example: 20 cm is 7.87 in, and 0.87 × 16 = 13.9, which rounds to 14, so about 7 14/16 = 7 7/8 in.

Doing it in your head. Multiply inches by 2.5 (double it, then add half), then add 0.04 for every inch. For 10 inches: 10 × 2.5 = 25, plus 10 × 0.04 = 0.4, giving 25.4 cm. For 7 inches: 17.5 + 0.28 = 17.78 cm. This is exact, not an approximation, because 2.5 + 0.04 = 2.54. For the reverse, multiply centimeters by 4 and divide by 10: 30 cm becomes 12 inches, against a true 11.81. That shortcut always runs about 1.6% high, which is fine for a rough idea and not fine for cutting anything.

Height: feet and inches to centimeters

Heights are the most common reason to convert inches. The method is two steps: turn the height into inches (feet × 12, plus the inches), then multiply by 2.54. So 5 ft 7 in is 67 inches, and 67 × 2.54 = 170.18 cm.

HeightTotal inchesCentimeters
4 ft 10 in58 in147.3 cm
5 ft 0 in60 in152.4 cm
5 ft 2 in62 in157.5 cm
5 ft 3 in63 in160.0 cm
5 ft 4 in64 in162.6 cm
5 ft 5 in65 in165.1 cm
5 ft 6 in66 in167.6 cm
5 ft 7 in67 in170.2 cm
5 ft 8 in68 in172.7 cm
5 ft 9 in69 in175.3 cm
5 ft 10 in70 in177.8 cm
5 ft 11 in71 in180.3 cm
6 ft 0 in72 in182.9 cm
6 ft 1 in73 in185.4 cm
6 ft 2 in74 in188.0 cm
6 ft 4 in76 in193.0 cm
6 ft 6 in78 in198.1 cm

Going from centimeters to a height in feet and inches, divide by 2.54 to get inches, then divide by 12. The whole number is the feet and the remainder is the inches.

CentimetersTotal inchesFeet and inches
150 cm59.1 in4 ft 11.1 in
155 cm61.0 in5 ft 1.0 in
160 cm63.0 in5 ft 3.0 in
165 cm65.0 in5 ft 5.0 in
170 cm66.9 in5 ft 6.9 in
175 cm68.9 in5 ft 8.9 in
180 cm70.9 in5 ft 10.9 in
185 cm72.8 in6 ft 0.8 in
190 cm74.8 in6 ft 2.8 in
200 cm78.7 in6 ft 6.7 in

That is why 170 cm is usually quoted as 5′7″, 180 cm as 5′11″, and 160 cm as 5′3″. For lengths in feet, the Feet to CM converter takes decimals such as 5.5 ft directly.

Inches and millimeters

One inch is exactly 25.4 mm, so a millimeter is about 1/25 of an inch. Millimeters are what you will meet on drill bits, bolts, paper sizes and most product specifications outside the US. A few useful pairs: 1/4 in = 6.35 mm, 1/2 in = 12.7 mm, 3/4 in = 19.05 mm.

Machinists in the US also use the thou or mil, one thousandth of an inch, which is 0.0254 mm (25.4 micrometers). It is not the same as a millimeter, despite the similar name.

Paper is a good example of how close the two systems come without matching. US Letter is 8.5 × 11 inches, which is 215.9 × 279.4 mm. A4, used almost everywhere else, is 210 × 297 mm, or about 8.27 × 11.69 inches: narrower and taller. A document laid out for one will not fit the other perfectly, which is why printers offer “fit to page”.

Why an inch is exactly 2.54 cm

Until the 1950s the inch was not quite the same everywhere. From 1893 the United States based its yard on the meter, using the ratio 1 meter = 39.37 inches from its 1866 Metric Act, which made the US inch about 2.540005 cm. The British inch, tied to a physical standard yard, worked out at about 2.539998 cm. The gap was tiny, about seven millionths of a centimeter, but it mattered to precision engineering.

Industry settled on a round number first: the British Standards Institution adopted an inch of exactly 25.4 mm in 1930, and the American Standards Association followed in 1933. Then the international yard and pound agreement, signed in 1959 by the US, UK, Canada, Australia, New Zealand and South Africa, made it official by defining the yard as exactly 0.9144 meters. Divide by 36 and the inch is exactly 2.54 cm.

The word itself comes from the Latin uncia, meaning a twelfth part, because an inch is a twelfth of a foot. Uncia is also where the word “ounce” comes from, since an ounce was originally a twelfth of a Roman pound.

Screens, TVs and other things sold in inches

Screen sizes are given as the diagonal in inches, corner to corner, not the width. Multiply by 2.54 to get the diagonal in centimeters.

Screen sizeDiagonal in cm
6.1 in15.5 cm
13.3 in33.8 cm
15.6 in39.6 cm
24 in61.0 cm
27 in68.6 cm
32 in81.3 cm
43 in109.2 cm
55 in139.7 cm
65 in165.1 cm
75 in190.5 cm

Because the measurement is diagonal, a 65-inch TV is roughly 1.4 m wide and 0.8 m tall at the usual 16:9 shape, not 165 cm wide. Measure the space you have against the width in the product specifications, not the headline number.

Frequently asked questions

How many centimeters are in an inch? ▼
There are exactly 2.54 centimeters in one inch. That is a definition, not a rounded figure, so 2 inches is 5.08 cm and 12 inches is 30.48 cm. The Inches to CM converter does any amount instantly.
How many inches are in a centimeter? ▼
One centimeter is 0.3937 inches, a little under 4/10 of an inch. It takes 2.54 cm to make one inch. Use the CM to Inches converter for other amounts.
Is an inch exactly 2.54 cm? ▼
Yes. Since 1959 the inch has been defined as exactly 25.4 millimeters, which is 2.54 centimeters. There is no rounding, so every inch-to-centimeter answer is exact to as many decimals as you like.
How many cm is 12 inches? ▼
12 inches (1 foot) is 30.48 cm. A standard 12-inch school ruler is therefore just over 30 cm long, which is why many rulers carry a 30 cm scale on the other edge.
How many inches is 10 cm? ▼
10 cm is 3.94 inches, just under 4 inches. 20 cm is 7.87 inches, 30 cm is 11.81 inches, and 100 cm (1 meter) is 39.37 inches.
How many mm are in an inch? ▼
An inch is exactly 25.4 millimeters. Half an inch is 12.7 mm and a quarter inch is 6.35 mm. The Inches to MM converter handles fractions and decimals.
How tall is 170 cm in feet and inches? ▼
170 cm is 5 feet 6.9 inches, which most people round to 5′7″. 180 cm is 5 ft 10.9 in (about 5′11″) and 160 cm is 5 ft 3 in. To convert a height yourself, divide the centimeters by 2.54, then divide the inches by 12.
How many cm is 5 feet 7 inches? ▼
5 ft 7 in is 67 inches, and 67 × 2.54 = 170.18 cm. 6 feet is 72 inches, which is 182.88 cm.
Is a centimeter bigger than an inch? ▼
No. An inch is about two and a half times longer than a centimeter. One inch is 2.54 cm, and one centimeter is only about 0.39 of an inch.
What is a quick way to convert inches to cm in my head? ▼
Multiply by 2.5, then add 0.04 for every inch: 10 in × 2.5 = 25, plus 0.4 = 25.4 cm. That is exact, because 2.5 + 0.04 = 2.54. Going the other way, multiplying centimeters by 0.4 gives inches that are about 1.6% too high, which is close enough for a quick estimate.

The short version

One inch is exactly 2.54 centimeters, and one centimeter is 0.3937 inches. Multiply inches by 2.54 to get centimeters; divide centimeters by 2.54 to get inches. 12 inches is 30.48 cm, 10 cm is 3.94 inches, and an inch is 25.4 mm. For heights, convert to total inches first, then multiply by 2.54. Or skip the arithmetic with the Inches to CM and CM to Inches converters.

Ready to try it?

Use the tool right now — free, no signup, no upload.