Utilities9 min readUpdated 2026-11-13

How Many Feet in a Mile? Charts, Fractions and Why It Is 5,280

Tools mentioned in this guide

There are 5,280 feet in a mile. The figure is exact. Going the other way, one foot is 1/5,280 of a mile, about 0.000189 miles, so 1,000 feet is 0.189 miles and 10,000 feet is 1.894 miles.

That makes half a mile 2,640 feet, a quarter mile 1,320 feet and a tenth of a mile 528 feet. A mile is also 1,760 yards, 63,360 inches and 1,609.344 meters. To convert, multiply miles by 5,280 to get feet, or divide feet by 5,280 to get miles.

If you just need a number, the Miles to Feet converter and the Feet to Miles converter work instantly. Below are charts both ways, a way to do it in your head, why the number is 5,280 and not 5,000, how a mile compares with track laps, steps and city blocks, and how the nautical mile differs.

Miles to feet: the chart

MilesFeetYardsAlso known as
0.1 mile528 ft176 yda tenth of a mile
1/8 mile660 ft220 ydone furlong
1/4 mile1,320 ft440 ydquarter mile
1/3 mile1,760 ft587 yd—
1/2 mile2,640 ft880 ydhalf mile
3/4 mile3,960 ft1,320 yd—
1 mile5,280 ft1,760 yd—
1.5 miles7,920 ft2,640 yd—
2 miles10,560 ft3,520 yd—
3 miles15,840 ft5,280 yd—
3.107 miles16,404 ft5,468 yda 5K
5 miles26,400 ft8,800 yd—
6.214 miles32,808 ft10,936 yda 10K
10 miles52,800 ft17,600 yd—
13.109 miles69,218 ft23,073 ydhalf marathon
26.219 miles138,435 ft46,145 ydmarathon
100 miles528,000 ft176,000 yd—

For distances not in the chart, multiply miles by 5,280. For example, 2.5 miles × 5,280 = 13,200 feet.

Feet to miles: the chart

FeetMilesMetersExample
1 ft0.000189 mi0.3 m—
100 ft0.0189 mi30.5 m—
500 ft0.095 mi152.4 m—
528 ft0.1 mi160.9 ma tenth of a mile
660 ft0.125 mi201.2 mone furlong
1,000 ft0.189 mi305 m—
1,320 ft0.25 mi402 mquarter mile
2,000 ft0.379 mi610 m—
2,640 ft0.5 mi805 mhalf mile
3,000 ft0.568 mi914 m—
5,000 ft0.947 mi1,524 m—
5,280 ft1 mi1,609 m1 mile
10,000 ft1.894 mi3,048 m—
14,000 ft2.652 mi4,267 ma “fourteener” peak
20,000 ft3.788 mi6,096 m—
29,032 ft5.498 mi8,849 mMount Everest
30,000 ft5.682 mi9,144 m—
35,000 ft6.629 mi10,668 mtypical airliner cruising altitude
40,000 ft7.576 mi12,192 m—

For other amounts, divide feet by 5,280. For example, 13,200 ft ÷ 5,280 = 2.5 miles. The meters column uses the exact figure of 0.3048 meters per foot; the Feet to Meters converter does other values.

How to convert miles and feet

  1. Miles to feet: multiply miles by 5,280. Example: 3 miles × 5,280 = 15,840 feet.
  2. Feet to miles: divide feet by 5,280. Example: 10,000 feet ÷ 5,280 = 1.894 miles.
  3. Fractions of a mile: 5,280 divides evenly by 2, 3, 4, 5, 6, 8, 10, 11, 12, 15 and 16, so the common fractions are whole numbers of feet: 1/2 = 2,640, 1/3 = 1,760, 1/4 = 1,320, 1/8 = 660, 1/10 = 528 and 1/16 = 330.
  4. Check which mile you have. Charts for boats and aircraft use nautical miles of about 6,076 feet (see below).

Doing it in your head. For miles to feet, multiply by 5,000, then add 280 per mile: 3 miles → 15,000 + 840 = 15,840 feet, which is exact. For a quick estimate, multiplying by 5,300 runs only about 0.4% high. For feet to miles, divide by 5,000, then take off 5%: 10,000 feet → 2 → about 1.9 miles (exact: 1.894), about 0.3% high.

Remembering the number. The classic memory aid is “five tomatoes”, which sounds like “five-two-eight-oh”.

A mile in yards, inches, meters and kilometers

One mile is the same distance as each of these:

UnitIn one mile
Feet5,280
Yards1,760
Inches63,360
Meters1,609.344
Kilometers1.609344
Furlongs8
Chains (surveying)80
Rods320
Nautical miles0.8690

Under an international agreement made in 1959, the foot is defined as exactly 0.3048 meters, which makes the mile exactly 1,609.344 meters. A kilometer is about 3,280.84 feet and a meter is about 3.28084 feet. For metric distances, use the Miles to KM, KM to Miles and Meters to Feet converters, and for the foot itself see how many centimeters are in an inch.

Why is a mile 5,280 feet?

The mile started out as a round number. The word comes from the Latin mille passus, “a thousand paces”. A Roman pace was two steps, about five Roman feet, so the Roman mile was 5,000 Roman feet, about 4,850 modern feet and a little shorter than the mile used today.

England kept the mile but measured farmland in a different unit, the furlong. The name means “furrow long”: the length of a furrow in a ploughed field, fixed at 660 feet (220 yards). Land was surveyed and taxed in furlongs, so the furlong could not easily change.

Several different miles were in use in England, including a 5,000-foot mile inherited from the Roman reckoning. In 1593 an Act of Parliament under Elizabeth I, a law restricting new building around London, spelled out what it meant by a mile: 8 furlongs, each furlong 40 poles and each pole 16½ feet. Eight furlongs of 660 feet is 5,280 feet, 280 feet longer than a 5,000-foot mile.

Because that length was written into a statute, it became known as the statute mile. It spread gradually and became the legal mile throughout Britain with the Weights and Measures Act of 1824.

The furlong is still around. Horse races in the US and UK are still measured in furlongs, eight to the mile, and the Kentucky Derby is run over 1¼ miles, which is 10 furlongs or 6,600 feet. The surveyor’s chain of 66 feet fits the same system: 10 chains make a furlong, 80 chains make a mile, and an area one chain wide and one furlong long is an acre of 43,560 square feet.

How far is a mile? Laps, steps, blocks and fields

5,280 feet is hard to picture, so here is a mile measured in more familiar things:

MeasureHow many make a mileNote
Laps of a 400 m running track4.02four laps plus about 31 feet
Lengths of a 50 m pool32.2about 32 lengths
Football fields, goal line to goal line (300 ft)17.6—
Football fields including end zones (360 ft)14.7—
Walking steps, 2.2 ft stride2,400shorter stride
Walking steps, 2.5 ft stride2,112longer stride
Minutes on foot at 3 mph20easy walking pace
Seconds by car at 60 mph6088 feet per second

On a track. A standard outdoor track is 400 meters around in the inside lane, so four laps are 1,600 meters. A mile is 1,609.344 meters, which is four laps plus another 9.34 meters, about 31 feet. A 5K race is 12.5 laps; see how many miles is a 5K.

In steps. Divide 5,280 by your stride length in feet. A 2.2-foot stride takes 2,400 steps per mile and a 2.5-foot stride takes 2,112. Pace matters too: a 2008 study in ACSM’s Health & Fitness Journal reported an average of about 2,250 steps for a mile walked in 20 minutes and about 1,935 for a mile walked in 15 minutes. At those rates, 10,000 steps is roughly 4.4 to 5.2 miles. A fast run takes fewer steps per mile, but a slow jog can take as many as a brisk walk.

In city blocks. Blocks are not a standard length. Chicago’s grid assigns 800 address numbers to the mile: 8 standard blocks of 660 feet, each one furlong long (the short side of a typical block is half that). In Manhattan about 20 north–south street blocks make a mile, an average of about 264 feet each, while the long crosstown blocks are about 900 feet, roughly six to a mile.

On a drag strip. The classic drag race is a quarter mile, 1,320 feet. Since 2008 the NHRA’s two fastest classes, Top Fuel and Funny Car, have raced to 1,000 feet instead, which is 0.189 miles.

Statute miles, nautical miles and survey miles

“Mile” on its own nearly always means the statute mile of 5,280 feet. Two other miles are worth knowing about:

  • Statute (international) mile = 5,280 feet = 1,609.344 meters. This is the mile on road signs, maps, odometers and running tracks.
  • Nautical mile = 1,852 meters, about 6,076.12 feet. It is used at sea and in aviation, and was originally based on one minute of latitude. It is 1.1508 statute miles, about 15% longer. A speed of one knot is one nautical mile per hour.
  • US survey mile = 5,280 US survey feet, about 1,609.347 meters. The survey foot was very slightly longer than the international foot, by 2 parts per million, which adds up to about 3.2 millimeters (an eighth of an inch) per mile. It mattered only in land surveying and mapping, and the United States retired the survey foot at the end of 2022 in favor of the international foot.

For sea and air distances, the Nautical Miles to KM and KM to Nautical Miles converters do the conversion.

Miles straight up: altitude in feet

Heights are given in feet, and converting them to miles makes them easier to picture:

  • 5,280 feet is exactly one mile up. Denver is nicknamed the Mile High City, and the west steps of the Colorado State Capitol carry markers for one mile above sea level. The marker on the 13th step, placed after a 2003 survey, is the current one.
  • 14,000 feet, the mark that makes a peak a “fourteener”, is 2.65 miles.
  • 29,032 feet, the height of Mount Everest (8,848.86 meters), is about 5.5 miles.
  • 35,000 feet is 6.63 miles. Passenger jets typically cruise between about 31,000 and 38,000 feet, roughly six to seven miles up.

Divide any height in feet by 5,280, or use the Feet to Miles converter.

Frequently asked questions

How many feet are in a mile? ▼
A mile is exactly 5,280 feet. That is 1,760 yards, 63,360 inches or 1,609.344 meters. The Miles to Feet converter does any other distance.
How many feet are in half a mile? A quarter mile? ▼
Half a mile is 2,640 feet and a quarter mile is 1,320 feet. Three quarters of a mile is 3,960 feet, an eighth of a mile is 660 feet and a tenth of a mile is 528 feet.
How many yards are in a mile? ▼
There are 1,760 yards in a mile, because a yard is 3 feet and 5,280 ÷ 3 = 1,760. Half a mile is 880 yards and a quarter mile is 440 yards. For other amounts, use the Yards to Feet converter.
Why are there 5,280 feet in a mile? ▼
Because English law defined the mile as 8 furlongs, and a furlong was already fixed at 660 feet. An Act of Parliament of 1593 described a mile as 8 furlongs, each of 40 poles, each pole 16½ feet: 8 × 40 × 16.5 = 5,280. That definition became the legal mile across Britain in 1824. The older Roman mile was 5,000 Roman feet.
How many miles is 1,000 feet? What about 10,000 feet? ▼
1,000 feet is 0.189 miles, a little under a fifth of a mile. 5,000 feet is 0.947 miles, 10,000 feet is 1.894 miles and 30,000 feet is 5.68 miles. Divide feet by 5,280, or use the Feet to Miles converter.
How many feet are in a nautical mile? ▼
A nautical mile is 1,852 meters, which is about 6,076 feet. That is about 796 feet (15%) longer than the 5,280-foot mile used on land. Sea and air navigation use nautical miles; road signs and maps use ordinary (statute) miles.
How many feet are in a kilometer? ▼
A kilometer is about 3,280.84 feet, so it is roughly 2,000 feet shorter than a mile. A mile is 1.609 kilometers and a kilometer is 0.621 miles. The Miles to KM and KM to Miles converters handle those.
How many steps are in a mile? ▼
It depends on your stride and pace. Divide 5,280 by your stride length in feet: a 2.2-foot stride takes 2,400 steps to cover a mile and a 2.5-foot stride takes 2,112. Most adults take somewhere around 2,000 to 2,500 walking steps per mile. A fast run takes fewer, but a slow jog can take as many steps as a brisk walk.
How many laps around a track is a mile? ▼
On a standard 400-meter track, a mile is 4.02 laps: four full laps plus about 31 feet (9.34 meters). Four laps on their own are 1,600 meters, so a four-lap race is slightly short of a true mile.
How many city blocks are in a mile? ▼
There is no standard block, so it depends on the city. Chicago’s grid assigns 800 address numbers to the mile, which is 8 standard blocks of 660 feet. In Manhattan about 20 north–south street blocks make a mile, an average of about 264 feet each, while the long crosstown blocks are about 900 feet, roughly six to a mile.
How do you remember that a mile is 5,280 feet? ▼
The usual trick is the phrase “five tomatoes”, which sounds like “five-two-eight-oh”: 5, 2, 8, 0. Another way is to remember that a mile is 8 furlongs of 660 feet.

The short version

A mile is exactly 5,280 feet, and a foot is 1/5,280 of a mile. Half a mile is 2,640 feet, a quarter mile is 1,320 feet, and 10,000 feet is 1.894 miles. Multiply miles by 5,280 to get feet; divide feet by 5,280 to get miles. The number comes from 8 furlongs of 660 feet. A nautical mile is longer, at about 6,076 feet. Or skip the arithmetic with the Miles to Feet converter.

Ready to try it?

Use the tool right now — free, no signup, no upload.