Utilities9 min readUpdated 2026-11-20

How Many Square Feet Are in an Acre? Charts, Dimensions and Acreage Math

One acre is exactly 43,560 square feet. It is also 4,840 square yards, about 4,047 square meters, or 0.4047 hectares. To turn acres into square feet, multiply by 43,560. To turn square feet into acres, divide by 43,560.

An acre measures area, so it can be any shape. As a square it is about 208.71 feet on each side. Half an acre is 21,780 square feet and a quarter acre is 10,890 square feet. A square mile holds exactly 640 acres.

If you just need a number, the Square Feet to Acres converter works instantly, and its swap button turns it into an acres to square feet converter. Below are charts in both directions, the dimensions of an acre, how it compares with a football field, lot-size and price-per-acre math, and where the number 43,560 comes from.

Acres to square feet: the chart

AcresSquare feetSquare yardsSquare meters
1/8 acre5,445605506
1/5 acre8,712968809
1/4 acre10,8901,2101,012
1/3 acre14,5201,613.31,349
1/2 acre21,7802,4202,023
3/4 acre32,6703,6303,035
1 acre43,5604,8404,047
1.5 acres65,3407,2606,070
2 acres87,1209,6808,094
2.5 acres108,90012,10010,117
3 acres130,68014,52012,141
5 acres217,80024,20020,234
10 acres435,60048,40040,469
20 acres871,20096,80080,937
40 acres1,742,400193,600161,874
100 acres4,356,000484,000404,686
160 acres6,969,600774,400647,497
640 acres (1 square mile)27,878,4003,097,6002,589,988

Every row is the number of acres multiplied by 43,560. Square yards are square feet divided by 9, and square meters are square feet multiplied by 0.09290304.

How to convert acres to square feet, and back

  1. Acres to square feet: multiply by 43,560. Example: 2.5 acres × 43,560 = 108,900 square feet.
  2. Square feet to acres: divide by 43,560. Example: 10,000 square feet ÷ 43,560 = 0.2296 acres.
  3. Check which unit a listing uses. Listings use both, so the same piece of land can appear as “10,890 sq ft” in one place and “0.25 acres” in another.

Doing it in your head. Treat an acre as 44,000 square feet. That is only 1% high, which is close enough to judge a listing. A tenth of an acre is 4,356 square feet, so 0.3 acres is three of those: 13,068 square feet.

This chart goes the other way, from square feet to acres:

Square feetAcresShare of one acre
1,000 sq ft0.0230 acres2.3%
2,500 sq ft0.0574 acres5.7%
5,000 sq ft0.1148 acres11.5%
6,000 sq ft0.1377 acres13.8%
7,500 sq ft0.1722 acres17.2%
8,000 sq ft0.1837 acres18.4%
10,000 sq ft0.2296 acres23.0%
12,000 sq ft0.2755 acres27.5%
15,000 sq ft0.3444 acres34.4%
20,000 sq ft0.4591 acres45.9%
25,000 sq ft0.5739 acres57.4%
30,000 sq ft0.6887 acres68.9%
40,000 sq ft0.9183 acres91.8%
43,560 sq ft1.0000 acres100.0%
50,000 sq ft1.1478 acres114.8%
100,000 sq ft2.30 acres—
500,000 sq ft11.48 acres—
1,000,000 sq ft22.96 acres—

How big is an acre? Dimensions in feet

An acre is a measure of area, not of length, so there is no single answer to “how long is an acre” or “how wide is an acre”. Any shape that covers 43,560 square feet is one acre. Each rectangle in this table is exactly one acre:

WidthLengthDistance aroundNote
66 ft660 ft1,452.0 ftOne chain by one furlong, the original acre
100 ft435.6 ft1,071.2 ft—
110 ft396 ft1,012.0 ft—
132 ft330 ft924.0 ft—
150 ft290.4 ft880.8 ft—
165 ft264 ft858.0 ft—
180 ft242 ft844.0 ft—
200 ft217.8 ft835.6 ft—
208.71 ft208.71 ft834.8 ftA perfect square

The shape changes the distance around it. A square acre needs about 835 feet of fence. The long, thin 66-by-660-foot acre needs 1,452 feet, which is 74% more fence for the same area. Walking the edge of a square acre is 0.16 miles, about three minutes at 3 mph.

As a circle, one acre has a radius of 117.75 feet. That is 235.5 feet across and about 740 feet around.

An acre compared with a football field

The usual comparison is an American football field. It is close, but an acre is the smaller of the two.

ThingSizeAreaIn acres
American football field, with both end zones360 ft × 160 ft57,600 sq ft1.32 acres
American football field, goal line to goal line300 ft × 160 ft48,000 sq ft1.10 acres
Soccer pitch at the common 105 m × 68 m size344.5 ft × 223.1 ft76,854 sq ft1.76 acres
NBA basketball court94 ft × 50 ft4,700 sq ft0.108 acres
Tennis court, doubles lines78 ft × 36 ft2,808 sq ft0.064 acres

One acre covers about 91% of a football field between the goal lines, or about 76% of the field with both end zones included. Put another way, if you start at one goal line and use the full 160-foot width, an acre ends 90.75 yards downfield, just past the far 10-yard line.

A soccer pitch at the common 105 by 68 meter size is 1.76 acres, so an acre is 57% of it. About 9.3 NBA basketball courts or 15.5 doubles tennis courts cover one acre. At the large end, Central Park in New York is 843 acres, which is about 36.7 million square feet or 1.32 square miles.

Lot sizes and price per acre

Lot sizes are often given in square feet, and it is not obvious how they relate to an acre. This table converts common lot sizes and shows how many lots of that size add up to one acre.

Lot sizeIn acresLots that fit in one acre
5,000 sq ft0.115 acres8.71
6,000 sq ft0.138 acres7.26
7,500 sq ft0.172 acres5.81
8,000 sq ft0.184 acres5.45
10,000 sq ft0.230 acres4.36
10,890 sq ft0.250 acres4
14,520 sq ft0.333 acres3
21,780 sq ft0.500 acres2
43,560 sq ft1.000 acres1

The last column is plain division. A real subdivision fits fewer lots than that, because streets, sidewalks and other shared land come out of each acre first.

Price per acre and price per square foot. Land is priced both ways. To compare two listings, divide a price per acre by 43,560 to get the price per square foot, or multiply a price per square foot by 43,560 to get the price per acre.

Price per acreSame price per square foot
$10,000$0.23
$25,000$0.57
$50,000$1.15
$100,000$2.30
$250,000$5.74
$500,000$11.48
$1,000,000$22.96

In the other direction, $1 per square foot is $43,560 per acre, $5 per square foot is $217,800 per acre and $10 per square foot is $435,600 per acre. A half-acre lot priced at $180,000 works out to $360,000 per acre, or $8.26 per square foot.

How to calculate the acreage of your land

  1. Measure the length and the width in feet. Use a long tape, a measuring wheel, or the dimensions printed on your survey or plat.
  2. Multiply them to get square feet. A lot 150 feet wide and 300 feet deep is 150 × 300 = 45,000 square feet.
  3. Divide by 43,560. 45,000 ÷ 43,560 = 1.033 acres.

If the land is not a rectangle, split it into rectangles and triangles, work out each area, and add them up before dividing. A triangle is half its base times its height: a triangular corner 200 feet along the base and 300 feet deep is 30,000 square feet, or 0.689 acres. The guide on how to calculate square footage covers L-shapes, triangles and circles step by step.

If the measurements are in meters, multiply length by width to get square meters and divide by 4,046.86. A 2,000 square meter plot is 0.494 acres. The Square Meters to Acres converter does this directly.

A tape measure gives an estimate. For a sale, a fence on the boundary or a dispute with a neighbor, use the figure from a licensed survey.

Acres in other units: hectares, square miles and sections

UnitIn one acreExact or rounded
Square feet43,560exact
Square yards4,840exact
Square rods (a rod is 16.5 ft)160exact
Square chains (a chain is 66 ft)10exact
Square meters4,046.8564224exact
Hectares0.404686rounded
Square miles0.0015625 (1/640)exact
Square inches6,272,640exact

The metric counterpart of the acre is the hectare, which is 10,000 square meters: a square 100 meters on each side. One hectare is 2.471 acres, and one acre is 0.4047 hectares. The Acres to Hectares converter and the Hectares to Acres converter handle either direction, and the Square Feet to Square Meters converter converts smaller areas.

The US Public Land Survey System divides land into squares called sections, each nominally one mile on a side. A mile is 5,280 feet, so a square mile is 27,878,400 square feet, which is exactly 640 acres. (See how many feet are in a mile.)

Survey unitAcresSquare feet
Township (6 miles × 6 miles, 36 sections)23,0401,003,622,400
Section (1 square mile)64027,878,400
Half section32013,939,200
Quarter section1606,969,600
Quarter-quarter section401,742,400

The 160-acre quarter section is the amount of land the Homestead Act of 1862 offered to settlers.

Why an acre is 43,560 square feet

The number looks arbitrary, but it is a product of two old English lengths: 66 feet × 660 feet = 43,560 square feet.

The acre began as a measure of ploughland: roughly the area a team of oxen could plough in a day. Its traditional shape was a long strip, one furlong long and one chain wide. A furlong, from the Old English for “furrow long”, is 660 feet. A chain is 66 feet, which is 22 yards.

In 1620 the English clergyman and mathematician Edmund Gunter introduced a surveying chain 66 feet long, divided into 100 links. With it, land area became simple to work out: ten square chains make one acre. In yards the same sum is 22 × 220 = 4,840 square yards, and nine square feet to the square yard gives 43,560.

The odd-looking digits come from the rod, an older unit of 16.5 feet. A chain is four rods, and an acre is 160 square rods.

Two slightly different acres. The international acre, based on the foot of exactly 0.3048 meters, is exactly 4,046.8564224 square meters. The United States also used a “survey acre” based on the US survey foot. It is about 4,046.87 square meters, larger by roughly 4 parts per million, or 0.17 square feet per acre. The US survey foot was retired at the end of 2022, and the difference never mattered for a house lot.

Tips for working with acres

  • A quarter acre is not 10,000 square feet. It is 10,890. A 10,000 square foot lot is 0.23 acres, about 8% smaller than a true quarter acre.
  • Do not mix feet and square feet. A square acre is about 209 feet on a side, but an acre is not “209 feet”. Doubling the sides of a square lot gives four times the area.
  • Ask what the acreage includes. A listed figure can include land you cannot build on, such as an easement or a strip along the road. The survey shows where the lines are.
  • Estimate fencing from the shape, not the area. One acre can need anywhere from about 740 feet of fence (a circle) to 1,452 feet (a 66-by-660-foot strip) or more.
  • Watch for the “builder’s acre”. The term is sometimes used for a rounded 40,000 square feet, a square 200 feet by 200 feet. That is about 8% less than a real acre.

Frequently asked questions

How many square feet are in an acre? ▼
One acre is exactly 43,560 square feet. That is also 4,840 square yards, about 4,047 square meters, or 0.4047 hectares. To convert, multiply acres by 43,560. The Square Feet to Acres converter does it both ways.
How many square feet is half an acre, or a quarter acre? ▼
Half an acre is 21,780 square feet and a quarter acre is 10,890 square feet. A third of an acre is 14,520 square feet, an eighth is 5,445 and three quarters is 32,670.
How big is an acre in feet? ▼
An acre is an area, so it has no single set of dimensions. A square acre is about 208.71 feet on each side. The traditional acre is a strip 66 feet wide and 660 feet long. Any rectangle whose length times width equals 43,560 square feet is one acre, such as 100 feet by 435.6 feet or 150 feet by 290.4 feet.
How many feet are in an acre? ▼
Feet measure length and acres measure area, so the question only has an answer in square feet: 43,560. If you mean the distance around, a square acre has a perimeter of about 835 feet, and a 66-by-660-foot acre has a perimeter of 1,452 feet.
How do I convert square feet to acres? ▼
Divide the square feet by 43,560. For example, 10,000 square feet ÷ 43,560 = 0.2296 acres, and 20,000 square feet is 0.4591 acres. The Square Feet to Acres converter gives the answer instantly.
How many acres is a football field? ▼
An American football field with both end zones is 360 feet by 160 feet, which is 57,600 square feet or 1.32 acres. From goal line to goal line it is 48,000 square feet, or 1.10 acres. So one acre is about 91% of the playing field between the goal lines.
How many square feet are in 2, 5 and 10 acres? ▼
Two acres is 87,120 square feet, five acres is 217,800 square feet and ten acres is 435,600 square feet. Forty acres is 1,742,400 square feet.
How many acres are in a square mile? ▼
A square mile is exactly 640 acres, or 27,878,400 square feet. In the US land survey system a one-square-mile block is called a section, and a quarter section is 160 acres.
How many square yards are in an acre? ▼
There are 4,840 square yards in an acre. A square yard is 9 square feet, and 4,840 × 9 = 43,560.
How many square meters or hectares are in an acre? ▼
One acre is 4,046.86 square meters, which is 0.4047 hectares. Going the other way, one hectare is 2.471 acres or 107,639 square feet. Use the Acres to Hectares converter for other amounts.
How do I calculate the acreage of a lot? ▼
Measure the length and the width in feet, multiply them to get square feet, and divide by 43,560. A lot 150 feet by 300 feet is 45,000 square feet, which is 1.033 acres. For an irregular lot, split it into rectangles and triangles, add up their areas, then divide.
Why is an acre 43,560 square feet? ▼
Because the acre was first defined as a strip of farmland one chain wide and one furlong long. A chain is 66 feet and a furlong is 660 feet, and 66 × 660 = 43,560. In yards that is 22 × 220 = 4,840 square yards.

The short version

An acre is exactly 43,560 square feet, 4,840 square yards, about 4,047 square meters or 0.4047 hectares. Multiply acres by 43,560 to get square feet, and divide square feet by 43,560 to get acres. Half an acre is 21,780 square feet and a quarter acre is 10,890. A square acre is about 208.71 feet on each side, and an acre covers about 91% of a football field between the goal lines. A square mile is 640 acres. Or skip the arithmetic with the Square Feet to Acres converter.

Ready to try it?

Use the tool right now — free, no signup, no upload.